Rockwell Automation 825P Modular Protection System Quick Start Guide - Manual (Page 14)

Quick Start Guide — Allen-Bradley Bulletin 825-P Modular Protection System
14
Programming
General
Parameters Use the following path with the front panel programming keys to access the general
parameter settings:
MAIN > Set/Show > Port
MAIN > Set/Show > Date/Time
MAIN > Set/Show > Password
Port: In addition to configuring Slot C (Port 4) for communications as described in
Step 4, settings are available for configuring the Port F (front panel) RS 232
communications. Port F is available for computer connection.
Date/Time: Program the date (day, month, year) and time (hour, minutes, seconds)
with the settings available here.
Password: The 825-P provides the ability to set password protection to limit access
to the programmable settings from the front panel. Password protection is disabled
from the factory.
See Appendix A for more details.