Rockwell Automation 56RF High Frequency 13.56 MHz RFID EtherNet/IP Interface Block - Manual (Page 4)

4 High Frequency 13.56 MHz RFID EtherNet/IP Interface Block
Drawing Number 10000181820 Ver. 01 - November 2012
About the 13.56 MHz RFID EtherNet/IP Interface Block
The EtherNet/IP Interface Block is a 24V DC I/O module that communicates
via EtherNet/IP. It features up to two RFID interface ports and two
configurable points. The sealed IP65, IP67, and IP69K housing of these
modules requires no enclosure. Note that environmental requirements other
than IP65, IP67, and IP69K may require an additional appropriate enclosure.
I/O connectors are sealed M12 style.
EtherNet/IP networks use advanced network technology, for example,
producer/consumer communication, to increase network functionality and
throughput.
High Frequency 13.56 MHz RFID EtherNet/IP Interface Block
(1) Functional Earth grounds the I/O block’s EtherNet/IP communication circuitry which is designed to
mitigate the effect of noise on the network. Refer to EtherNet/IP Connectors on page 10 for
connections.
Functional Earth (1)
Ethernet/IP D-Code
M12 Connector
Ethernet/IP D-Code
M12 Connector
Status LEDs
Node Address
Switches
M12 RFID
Transceiver Interface
M12 RFID
Transceiver Interface
(IPD22, IPD22A)
M12 Input
Connector
M12 Output Connector (IPS12, IPD22)
M12 Input Connector (IPD22A)
Auxiliary Power
(M12 4-Pin Male Input)
Auxiliary Power
(M12 4-Pin Female
Pass Through)