BIXOLON IMPACT PRINTER SRP-270 User Manual
Srp-270, Service manual, Impact printer rev. 3.02
Table of contents
Document Outline
- 1. Precaution Segment
- 1-1 Safety Precautions
- 1-2 Servicing Precaution
- 1-3 Precaution for Electrostatically Sensitive Devices (ESDs)
- 2. Installation and Operation
- 3. Product Specifications
- 3-1 Appearance
- 3-2 General Specifications
- 3-3 Printer Mecha Specifications
- 3-3-1 Printer Mecha Specification
- 3-3-2 Character Specification
- 3-3-3 Printer (SMP-710/SMP-710N) Pin Description
- 3-3-4 Printer Head Specification
- 3-3-5 Printer Head Thermistor Specification
- 3-3-6 Feed & Carriage Motor Specification
- 3-3-7 Auto cutter specification
- 3-3-8 Paper Specification
- 3-3-9 Ribbon Cassette Specification
- 3-3-10 Other Component Specification
- 3-4 SMPS Specifications
- 3-5 Interface Specifications
- 3-6 Cash Drawer Specifications
- 4. Hardware
- 5. Disassembly and Assembly
- 5-1 General Precautions on Disassembly
- 5-2 Plate Bottom
- 5-3 Cover Assy (SRP-270D Type)
- 5-4 Cover Assy (SRP-270A & SRP-270C Type)
- 5-5 Case Upper Assy (SRP-270A & SRP-270C Type)
- 5-6 Case Upper Assy (SRP-270D Type)
- 5-7 Printer Assy (SRP-270A & SRP-270C Type)
- 5-8 Printer Assy (SRP-270D Type)
- 5-9 Auto Cutter Assy
- 5-10 Main PCB
- 5-11 Interface Board Assy
- 6. Alignment and Adjustments
- 7. Troubleshooting
- 8. Appendix (Spec of SMP-710/710N)
- 8-1 Specifications
- 8-1-1 Printing specifications
- 8-1-2 Character specifications
- 8-1-3 Paper specifications
- 8-1-4 Ribbon Cassette specifications
- 8-1-5 Environmental specifications
- 8-1-6 Reliability
- 8-1-7 Main Unit specifications
- 8-1-8 Electrical specifications
- 8-1-9 Mechanisms specifications
- 8-1-10 Principle of Movement
- 8-2 Handling the Printer
- 8-3 Maintenance
- 8-4 Lubricants and Adhesive Application
- 8-5 Tools, Lubricants and Adhesives
- 8-6 Repair
- 8-7 Disassembly
- 8-8 Assembly
- 8-1 Specifications