3D Robotics X8-M - Manual (Page 18)

17
Before accepting the survey, check that the mission complies with the X8’s operating parameters. Once you
accept the survey, you will not be able to edit it directly by re-opening the Survey Tool. If you need to adjust the
survey, clear the mission (right click, select Clear Mission), and repeat the survey configuration process.
Camera
Canon SX260-SX280
Altitude
50-100 m
Camera top facing forward
checked
Flying speed
1-17 m/s
Use speed for this mission
checked (optional if speed set to default speed of 5 m/s)
Photo Every
greater than 2 s
Flight time
under 14 min depending on environmental conditions
!
Do not accept the mission if any of the parameters
exceed the X8’s operating limits.
Operating Parameters
Configure Survey: Accept Survey
Accept
Select Accept to save the mission.
If Mission Planner prompts you for a home altitude, enter the
altitude that you specified in the Survey Tool.