Wolo 418 Powerhouse - Manual

INSTALLATION INSTRUCTIONS
POWERHOUSE
DUAL TRUMPET HORN Model 418
Warranty
Wolo Manufacturing Corporation (“Wolo”) warranties to the original purchaser, for
three months from the date of purchase, that this product is free from defects in work-
manship and materials. If there is such a proven defect, Wolo, at its option, will either
repair or replace the item free of charge, if it is returned to Wolo within three months
from the date of purchase together with proof of purchase as described below. Wolo
reserves the right to inspect any defect prior to settling any warranty claim by repair or
replacement. This warranty is limited as above provided and Wolo will not be responsi-
ble for fire or other casualty or accident, due to neglect, abuse, abnormal use, modifica-
tions, faulty installation of this product, or natural causes.
ANY EXPRESSED WARRANTY NOT PROVIDED HEREIN IS EXCLUDED AND DIS-
CLAIMED. THE IMPLIED WARRANTIES OF MERCHANTABILITY AND OF FITNESS
FOR A PARTICULAR PURPOSE ARE EXPRESSLY LIMITED TO A TERM OF THREE
(3) MONTHS. UNDER NO CIRCUMSTANCES SHALL WOLO BE LIABLE TO PUR-
CHASER OR ANY OTHER PERSON FOR ANY SPECIAL OR CONSEQUENTIAL
DAMAGES, WHETHER ARISING OUT OF BREACH OF WARRANTY OR OTHER-
WISE.
To obtain warranty service, return the product prepaid, and include the original bill of
sale showing the date of purchase. Provide with the return a brief description of the
problem. Also, include with the return a check or money order in the amount of $10.00
to cover return shipping. Mail to:
Wolo Manufacturing Corp.
One Saxwood Street, Deer Park, NY 11729
Attn: Warranty Service E-mail: [email protected]
© 2005 Wolo Mfg. Corp
All Rights Reserved.
Your purchase of a POWERHOUSE dual trumpet horn is the perfect choice to complement your
vehicle. Made with long lasting weather resistant materials and skillfully crafted to provide years
of reliable service.
TRUMPET INSTALLATION
1. Locate the desired area you wish to mount trumpets (NOTE: COMPRESSOR HAS TO BE
MOUNTED CLOSE TO TRUMPETS IN A DRY INTERIOR LOCATION).
2. Use the horn gasket as a template, mark hole locations and drill to size. See Fig. 1.
3. Mount horn as shown on Fig. 2. NOTE: TIGHTEN EVENLY AFTER THE FRONT BOLT
AND FLEXIBLE INLET HOSE HAVE BEEN INSTALLED.
Fig. 2