Wolo 418-LED Powerhouse User Manual

Powerhouse, Plus

INSTALLATION INSTRUCTIONS

POWERHOUSE

DUAL TRUMPET HORN Model 418-LED

Warranty

Wolo Manufacturing Corporation (“Wolo”) warranties to the original purchaser,
for three months from the date of purchase, that this product is free from defects
in workmanship and materials. If there is such a proven defect, Wolo, at its
option, will either repair or replace the item free of charge, if it is returned to Wolo
within three months from the date of purchase together with proof of purchase
as described below. Wolo reserves the right to inspect any defect prior to settling
any warranty claim by repair or replacement. This warranty is limited as above
provided and Wolo will not be responsible for fire or other casualty or accident,
due to neglect, abuse, abnormal use, modifications, faulty installation of this
product, or natural causes.

ANY EXPRESSED WARRANTY NOT PROVIDED HEREIN IS EXCLUDED AND DIS-
CLAIMED. THE IMPLIED WARRANTIES OF MERCHANTABILITY AND OF FITNESS
FOR A PARTICULAR PURPOSE ARE EXPRESSLY LIMITED TO A TERM OF THREE
(3) MONTHS. UNDER NO CIRCUMSTANCES SHALL WOLO BE LIABLE TO PUR-
CHASER OR ANY OTHER PERSON FOR ANY SPECIAL OR CONSEQUENTIAL
DAMAGES, WHETHER ARISING OUT OF BREACH OF WARRANTY OR OTHER-
WISE.

To obtain warranty service, return the product prepaid, and include the original bill of
sale showing the date of purchase. Provide with the return a brief description of the
problem. Also, include with the return a check or money order in the amount of $10.00
to cover return shipping. Mail to:

Wolo Manufacturing Corp.

One Saxwood Street, Deer Park, NY 11729
Attn: Warranty Service E-mail: [email protected]

Your purchase of a POWERHOUSE dual trumpet horn is the perfect choice to comple-
ment your vehicle. Made with long lasting weather resistant materials and skillfully craft-
ed to provide years of reliable service.

TRUMPET INSTALLATION

1. Locate the desired area you wish to mount trum-
pets (NOTE: COMPRESSOR HAS TO BE
MOUNTED CLOSE TO TRUMPETS IN A DRY
INTERIOR LOCATION).
2. Use the horn gasket as a template, mark hole
locations and drill to size. See Fig. 1.

3. Mount horn as shown on Fig. 2. NOTE:
TIGHTEN EVENLY AFTER THE FRONT
BOLT AND FLEXIBLE INLET HOSE HAVE
BEEN INSTALLED.

COMPRESSOR
INSTALLATION

4. For best performance mount the com-
pressor close to the trumpets. The com-
pressor is not water resistant, it is important
that it be mounted inside the vehicle in an
area that is dry.

PLUS