Western Digital WD Arkeia R620 Installation and Configuration Guide - Manual (Page 20)

14 Arkeia Physical Appliance Installation and Configuration Guide
127.0.0.1 localhost.localdomain localhost
192.168.5.110 marketing.us.arkeia.com marketing
192.168.5.38 appliance.us.arkeia.com appliance
2. Check forward and reverse DNS from the client to the appliance.
EXAMPLES
ping
appliance.us.arkeia.com
ping 192.168.5.38
nslookup appliance.us.arkeia.com
nslookup 192.168.5.38
3. Download the correct client package for your OS and Architecture, then
install the Arkeia package on the client machine. Client packages are
available here: http://www.arkeia.com/r/client
EXAMPLES
LINUX RPM:
rpm -Uvh arkeia-x.x.x.i386.rpm
LINUX DEB sudo dpkg -i arkeia-x.x.x.i386.deb
TAR.GZ:
tar zxvf arkeia-x.x.x.tz
cd package
./install
WINDOWS:
unzip and run setup.exe and follow setup steps
4. Adding the Client to the Arkeia Physical Appliance
There are two ways to register the backup client to the backup server.
OPTION #1
Use the Arkeia Physical Appliance Web Interface. Navigate to:
Configure  Clients
a. Click on “Add A New Client”
b. Add the client information
c. Click on the “Advanced Tab” for more options
d. Click “Add Client” to add the client to the Appliance
OPTION #2
Manually edit configuration files on the client machine to declare the
name of the server that will communicate with that client.