Vicor PFC MegaPAC-HPEL Power Factor Corrected AC-DC Switchers - Manual (Page 27)

UG:119 vicorpower.com Applications Engineering: 800 927.9474 Page 27
Current Share Boards - Optional Feature (Cont.)
Figure 14. Cable Drawing
P1
24.0" +/- 1.0"
Power
T1
-V1
T2
-V2
Red, 22 AWG
Yellow, 22 AWG
Brown, 22 AWG
White, 22 AWG
Black, 22 AWG
1 2
3 4
5 6
1.74"
(44.2mm)
0.12"
(3.0mm)
1.500"
(38.1mm)
0.12"
(3.0mm)
0.900"
(22.9mm)
1.14"
(29.0mm)
0.13" (3.3mm) Dia Non
Plated thru hole 4
places
Molex CT43045F surface mountable
connector. .390" height above board.
J1 Pinout
Figure 13. Mechanical Drawing
Pin Description
1
Power
2 T1
3 -V1
4 T2
5 -V2
6 No Connection
Specifications:
1. Power: 2-50 Vdc at 5 mA maximum.
2. Accuracy: +/- 1 mV between -Vout connections.
3. Output current when not trimming up: +/- 1 uA (VI-200/J00),
+/-5 uA (Maxi).
4. Use four non-plated through holes with standoffs for mounting.
5. CSB01 MUST be used for current sharing VI-200/VI-J00 converters (VI-200/J00).
6. CSB02 MUST be used for current sharing Maxi converters
(Maxi, Mini and Micros).
PLEASE NOTE, THE CSB IS NOT INTENDED FOR HOT-SWAP APPLICATIONS
Contact your Regional Applications Engineer at 1-800-927-9474
for additional information.