USG Sheetrock Paper-Faced Metal Bead and Trim - Manual

Manufactured by
United States Gypsum Company
550 West Adams Street
Chicago, IL 60661
Trademarks
The following trademarks used
herein are owned by United States
Gypsum or a related company:
D
urabonD
, E
asy
s
anD
, s
hEEtrock
.
Product Information
See usg.com for the most
up-to-date product information.
Note
Products described here may not
be available in all geographic
markets. Consult your U.S.
Gypsum Company sales office or
representative for information.
Notice
We shall not be liable for inciden-
tal and consequential damages,
directly or indirectly sustained, nor
for any loss caused by application
of these goods not in accordance
with current printed instructions
or for other than the intended use.
Our liability is expressly limited to
replacement of defective goods.
J1124/rev. 5-07
©2007, United States Gypsum Company
Printed in U.S.A.
Any claim shall be deemed waived
unless made in writing to us within
thirty (30) days from date it was
or reasonably should have been
discovered.
Safety First!
Follow good safety and industrial
hygiene practices during handling
and installation of all products and
systems. Take necessary precau-
tions and wear the appropriate
personal protective equipment as
needed. Read material safety data
sheets and related literature on
products before specification and/
or installation.
For product information
and literature:
800 USG.4YOU (874.4968)
usg.com