USG Curvatura 2x 2 Ceiling System - Manual (Page 7)

Page 7 of 8
Step 4:
Edge Trim Installation C URVATURA 2
Ј x 2Ј
Ceiling System
Installation
Instructions
Remove any temporary bracing. Next, follow the Ribbon Diagram to
identify the proper position for each
Edge Trim segment. Install the Edge Trim by sliding each trim
segment onto to the grid. For ease of
installation, Edge Trim segments are
designed to be about 1/2-inch shorter
than the Main Tee segments.
Fascia Splices and Corner Clips are provided
to cover the gaps. To install each Fascia Splice, squeeze the
bottom tab to allow a snug fit around the
trim. Hook the tab over the bottom edge of the
trim. Then, bend over the top of the splice
as shown here. It’s easiest to install Fascia
Splices progressively.
Next, apply Corner Caps. Hook each Corner
Cap over the bottom edge of the trim, then
bend over the top as shown here. Squeeze the trim against the grid to
ensure a proper fit. Then, screw-attach
the trim segments to the grid with
number-six by three-eighths self-tapping
screws. Be sure to install at least two
screws per trim segment.
B. C.
D. E. F.
G. H. I.
A.