USG Curvatura 2x 2 Ceiling System - Manual (Page 5)

C URVATURA 2
Ј x 2Ј
Ceiling System
Installation
Instructions
Step 3: Install
Remaining Grid
Page 5 of 8
D.
Using the first row of hanger wires as a
guide, install each additional row of hanger
wire two feet apart. Use string lines or a laser to ensure that
each row will be properly aligned. After hanging the first Flush-Cut Main Tee
in a row, connect it to the previous row
with a Cross Tee.
Continue hanging Main Tees and joining
them with Cross Tees to form the grid. When all Main Tees have been hung,
tightly wrap the ends of each hanger
wire. This is important because the ends
of these wires could be seen from the
side of the completed installation.
I.
E.
H. J.
F.
A. B. C.