beautypg.com

Installation, Accessible stabilizer bars – USG Plank and Large Panel Stabilizer Bars User Manual

Page 11

background image

Plank and Large Panel Stabilizer Bars

Application Guide

11

Step 4

The capture tabs should not contact the
paint or finish of the panel edge and should
be pressed in as far as they can go to avoid
interference with the suspension system.

Step 5

If panel length is ≥ 969 then two stabilizer
bars are required at the 1/3 and 2/3 points.

Note:

Install adjoining stabilizer bars at

a slight offset to avoid interference with
adjacent stabilizer bars.

Step 6

Install the panel into the suspension system.

Accessible Stabilizer Bars

Installation