USG Plank and Large Panel Stabilizer Bars - Manual (Page 10)

10 Application Guide Plank and Large Panel Stabilizer Bars
Step 1
Towards each end of the ASB a stab tab
is punched out of the lower leg. To ensure
proper positioning the stab tab should be bent
downwards.
Step 2
Position the ASB on the back of the panel.
There is a slot on either end of the bar that
should align with the panel edge. Press firmly
down on the bar until the stab tabs are fully
engaged.
Step 3
Engage the capture tabs on either end
of the ASB.
Accessible Stabilizer Bars (ASB)
Installation