Sunnex CS2050D (Dual) User Manual
Page 16
INSTALLATION AND OPERATING MANUAL
15
counter sunk holes on this end of the balance arm. Position the counter weight on the
opposite side of the counter sunk holes on the balance arm. Set the (2) flat head screws
(1/4-20” X 1/2”) supplied hex screws in the counter sunk holes and tighten them down
using provided (5/32”) Allen wrench.
Inset 3.0 (Figure 8)
8. Insert the sterilizable handle onto the mounting screw in the center of the lamp head and
rotate clockwise to tighten.
9. Plug the hospital grade plug into the outlet. The light is ready for use.
5.3 Pre-Installation Instructions (Ceiling Dual Light)
1.
The dual mounted light comprises of two identical single ceiling mounted lights combined
with the use of a dual seismic ceiling bracket.
2.
In order to utilize the provided aesthetic dome covers, the dual mount seismic bracket must
be used. These installations are predominantly below the false ceiling. If installing the dual
light above a drop ceiling, it is likely the bracket cover (dome) will not be required as the
bracket will not be visible to the user. Alternatively, the flat, plastic ceiling covers (provided