Retsch RM 200 - Manual (Page 22)

11/6/2012 22  Retsch GmbH 0002
without automatic switching off.
Fig.14
Starting the milling operation
• When the lid is closed:
• The milling operation is started with the start
button Q. Fig.13
 The milling time is recorded and the
remaining milling time is indicated in display
U.
The milling operation can be started only if the lid is
closed.
Please take all necessary measures, depending on
the dangerousness of your sample, to prevent
danger to persons.
Please note that the properties, and therefore the
dangerousness of your sample, can change during
the milling process.
Q P
O R U