Retsch PM GrindControl - Manual (Page 23)

Software
23
• tool bar
Fig. 22: PM GrindControl Software function areas
5.5.2.1 Menu View - Diagram
Activates or deactivates the display of the measurement diagram.
Item numbers [3]+[4] in the "Function Areas of the PM GrindControl software"
figure.
Alternatively, you can also use the following button.
Fig. 23: Show Diagram button
5.5.2.2 Menu View - Measurement Settings
Activates or deactivates the display of the measurement settings and
measurement Start - Pause - Stop.
Item numbers [2]+[5] in the "Function Areas of the PM GrindControl Software"
figure.
Alternatively, you can also use the following buttons.
Fig. 24: Show diagram button
5.5.2.3 Menu View - Status Bar
Activates or deactivates the status bar display.
Item number [6] in the "Function Areas of the PM GrindControl Software"
figure.
Alternatively, you can also use the following button.
Fig. 23: Status Bar Display button
5.5.2.4 Menu View - Tool bar
Activates or deactivates the display of the tool bar.