Retsch PM GrindControl - Manual (Page 13)

The First Start
13
This adds the wireless grinding jar cover to the current measurement task as one
of the four possible measurement systems.
14. After clicking on the Accept button, you can end the procedure by clicking
on the Close button.
15. Now, click on the Continue button in the Assign measurement systems
program window.
In the Measurement Task window, you can input a remark for the measurement
task.
16. Click on the Continue button.
17. In the measurement file window, input a name for the first measurement of
the measurement task.
In the measurement file window, you can also input the operator and a remark for
the measurement.
18. You can end the creation of the measurement task with the Finish button.
19. In the program window, in the Run Settings area, click on the protocol
inputs button.
Fig. 6: Protocol Inputs
20. After making these inputs, you can store the data with the Accept button
21. With the Close button, you are taken back to the program window.
22. Start the measurement with the Start button.