Quadrox Count-Guard User Manual - Manual (Page 38)

Count!Guard Manual 38
The rest of the parameters below don’t have to be configured for normal conditions and only in
non-standard environments:
 People lifespan: This parameter is used to configure how fast people are entering after each
other. By default this is 0.5 seconds. In crowded environments this can be lowered
(minimum = 0.3 seconds)
 Use shadow removal: Visible shadows may deteriorate counting results. This parameter
reduces the shadow effect. It is enabled by default.
 Sensibility: Value between 0 and 1, default value 0,5. This parameter can be increased for
low contrast images or decreased for high contrast images.
 Min Shadow threshold: Don’t change this parameter unless requested by your installer or
support.
 Max Shadow threshold: Don’t change this parameter unless requested by your installer or
support.
 Distortion Coef K1: Don’t change this parameter.
 Distortion Coef K2: Don’t change this parameter.
 Distortion Coef P1: Don’t change this parameter.
 Distortion Coef P2: Don’t change this parameter.
To finish the configuration, execute the following steps:
 Click
, check Show main screen and click Save.
Save Configuration Screen
Version 2.1.0.0 Series
2010 Quadrox NV