Quadrox Count-Guard User Manual - Manual (Page 15)

Count!Guard Manual 15
3.2.2 Cameras
In order to have streaming video and get counts, a camera from an added WebCCTV server has to
be selected and configured. Selecting and configuring a camera is done in the Servers & Cameras
page of the Configuration tab and allows to:
 Add camera
 Delete camera
 Edit & Configure camera (Counting Algorithm)
The camera configuration (algorithm) is the core of the Count!Guard application.
The counting accuracy depends mainly on this configuration!
Servers & Cameras Screen
3.2.2.1 Add camera
To add a camera that is connected to a server that is added in the Count!Guard application, execute
the following steps:
 Select the server in the Servers & Cameras page and click the Edit Server link.
 Select the Cameras tab and use drop down list to choose a camera.
 Click Add.
 Click Finish. Your camera has been added.
Version 2.1.0.0 Series
2010 Quadrox NV