Quadrox Count-Guard User Manual - Manual (Page 34)

Count!Guard Manual 34
4.1.2 Cameras
In order to have streaming video and get counts, a camera from an added WebCCTV server has to
be selected and configured. Selecting and configuring a camera is done in the Cameras manager
section of the Configuration tab and allows to:
 Add camera
 Delete camera
 Edit & Configure camera (Counting Algorithm)
Camera Manager Screen
The camera configuration (algorithm) is the core of the Count!Guard application.
The counting accuracy depends mainly on this configuration!
4.1.2.1 Add camera
To add a camera that is connected to a server that is added in the Count!Guard application, execute
the following steps:
 Select a server in the Servers panel. The cameras on this server will appear in the Cameras
from selected server panel.
 Click Add>>.
Your camera has been added to the Added cameras panel.
Version 2.1.0.0 Series
2010 Quadrox NV