MacDon D65 - Manual (Page 35)

TOW-BAR
169784 33 Revision A
STEP 17. INSTALL CRADLE
ASSEMBLIES
A. LEFT SIDE CRADLES
Installation of LEFT SIDE cradles is identical for all
headers:
a. Install cradle assembly (A) to header frame leg as
shown using two 3\8 NC X 1.0 LG carriage bolts
and flanged smooth faced lock nuts at (B) and one
1/2 NC X 1.0 LG Torx
® head machine screw and
flanged smooth faced lock nut at (C).
b. Tighten hardware.
B. RIGHT SIDE CRADLES
I. ALL EXCEPT 30 FT WINDROWER
a. Install cradle assembly (D) to header frame leg as
shown using two 3\8 NC X 1.0 LG carriage bolts
and flanged smooth faced lock nuts at (E) and one
1/2 NC X 1.0 LG Torx head machine screw and
flanged smooth faced lock nut at (F).
b. Tighten hardware.
D
F
E
RH -30’ FLEX SHOWN
LH -30’ FLEX SHOWN
A
C
B