MacDon D65 - Manual (Page 11)

PREPARE HEADER
169784 9 Revision A
STEP 1. PREPARE HEADER
a. Use a lifting vehicle to raise header, or attach
header to windrower or combine and raise header
fully.
DANGER
To avoid bodily injury or death from
unexpected start-up or fall of raised header,
stop engine, remove key and engage header
lift cylinder stops before going under header
for any reason. If using a lifting vehicle, be
sure header is secure before proceeding.
b. Engage header lift cylinder stops or support
header on blocks on level ground. Blocks should
support the header approximately three feet off
the ground.