Step 13. install smv sign, Step 14. install divider rod storage bracket – MacDon D65 User Manual
Page 31

SAFETY
SIGNS
169784
29
Revision A
STEP 13. INSTALL SMV SIGN
a. Remove existing bolt (A) in hose support at right
end reel arm.
b. Assemble SMV sign (B) and bracket (C) with a 3/8
NC X 0.75 LG carriage bolt (D) and smooth face
locknut. Do not tighten.
c. Attach SMV sign and bracket assembly (E) to
hose support with a 3/8 NC X 3.0 LG hex head
bolt (F).
d. Tighten
hardware.
STEP 14. INSTALL DIVIDER ROD
STORAGE BRACKET
a. Retrieve divider rod storage bracket from kit.
b. Locate bracket (G) on right endsheet brace as
shown and install 3/8 NC X 0.75 LG carriage bolt
(H) and smooth face locknut.
c. Store divider rods (J).
A
B
D
C
E
F
G
H
J
This manual is related to the following products: