MacDon D65 - Manual (Page 33)

TOW-BAR
169784 31 Revision A
STEP 16. ASSEMBLE TOW-BAR
CRADLES
The cradle assemblies are designed for your
particular header size and application. Refer to the
appropriate section to assemble the LEFT SIDE
and RIGHT SIDE cradles.
A. LEFT SIDE CRADLE ASSEMBLY
I. WINDROWER 30 FT / COMBINE 30 FT
FLEX / ALL 35 FT RIGID
a. Retrieve cradle (A), extension (B), and support (C)
from kit.
b. Assemble parts as shown with four 3/8 NC X 1.0
LG carriage bolts (D) and flanged smooth face
lock nuts.
c. Tighten hardware.
II. COMBINE 30 FT RIGID
a. Retrieve cradle (E), extension (F), and support (G)
from kit.
b. Assemble parts as shown with four 3/8 NC X 1.0
LG carriage bolts (H) and flanged smooth face
lock nuts.
c. Tighten hardware.
III. COMBINE 35 FT FLEX / ALL 40 – 45 FT
a. Retrieve cradle (J), and support (K) from kit.
b. Assemble parts as shown with two 3/8 NC X 1.0
LG carriage bolts (L) and flanged smooth face
lock nuts.
c. Tighten hardware.
H
E
F
G
L
J
K
D
A
B
C