beautypg.com

Cnpc, Cnc2, Step 1] – retrieve address – Opticon OPR 3101 brief setup User Manual

Page 2: Create label

background image

2 - OPTICON

Overview of steps

Depending on the type of device to be connected,
take the steps as further described. To configure
the required options:
• scan the SET label
• scan the required option(s)
• scan the END label
After scanning the END label, the new settings are
stored in non volatile memory.

Reader to Cradle

• when using USB-HID interface: connect to USB-

HID cradle (step 2 B)

• for all interfaces: connect by scanning (step 3)

Reader to PC / Other device

• retrieve device address (step 1)
• connect to PC (step 2 A)
• security options (step 2 Optional)
• connect by scanning (step 3)

To disconnect the current reader:

• scan the disconnect label (step disconnect)

To return to default settings:

• scan the reset label (step reset)

---------------------------------------------------------------

[STEP 1]
– RETRIEVE ADDRESS

The address is mostly displayed on the product
label as a hexadecimal code (example: 00-11-F6-
03-39-69). Otherwise consult the documentation of
the device how to retrieve the device address code.
To enable the reader to communicate to the other
device, the reader must be configured with this
code. The easiest way to do this is to create a
barcode label of the hexadecimal code as
described below.

– CREATE LABEL

Opticon provides a simple on-line application on

http://opticonfigure.opticon.com/bluetooth.asp

• Type in the digits of the hexadecimal code in

numbers and capital characters without dashes,
dots and spaces (example: 0011F6033969).

• Submit the code into a barcode (example:

0011F6033969). You have to print the screen
to have it available for scanning.

---------------------------------------------------------------

[STEP 2 A]
CONNECT TO PC

[STEP 2 B]
CONNECT TO USB-HID
CRADLE

---------------------------------------------------------------

SET

_ZZ_

ZZ

Connect to
PC

_cnpc_

CNPC

END

_ZZ_

ZZ

SET

_ZZ_

ZZ

Connect to
Cradle
(USB-HID)

_cnC2_

CNC2

END

_ZZ_

ZZ