Omnitron Systems Technology iConverter Single-Fiber CWDM/AD - Manual

iConverter CWDM/AD
1 Channel Single-Fiber Add/Drop Multiplexer
USER MANUAL
Product Overview
iConverter 1-Channel Single-Fiber CWDM/AD modules are Course Wave Division
Multiplexing (CWDM) Optical Add and Drop Multiplexers (OADM). The CWDM/AD
modules add (multiplex) and drop (de-multiplex) one channel on one or both
directions of a CWDM single-fiber common link. Nine standard models of the
1-Channel Single-Fiber CWDM/AD modules are available.
The Single-Fiber CWDM/AD modules support dual fiber Channel Ports and single-
fiber Common Port connections. Each fiber strand on the Channel Port supports a
different wavelength, one wavelength for transmit (Tx) and a different wavelength
for receive (Rx).
Model Numbers
Model Type Model Number
Channel Port
ITU Center Wavelength (nm)
Tx/Rx
Left Channel Right Channel Common Port
1-Channel
OADM
8878-27 1271/1291 1291/1271 1271 to 1451
8878-31 1311/1331 1331/1311 1271 to 1451
8878-35 1351/1371 1371/1351 1271 to 1451
8878-39 1391/1411 1411/1391 1271 to 1451
8878-43 1431/1451 1451/1431 1271 to 1451
8878-47 1471/1491 1491/1471 1471 to 1611
8878-51 1511/1531 1531/1511 1471 to 1611
8878-55 1551/1571 1571/1551 1471 to 1611
8878-59 1591/1611 1611/1591 1471 to 1611
Port Definitions
Channel Port (Left and Right)
The Channel Ports transmit and receive signals using two specific CWDM
wavelengths. The Channel Ports are multiplexed on and demultiplexed from the
Common Port. As shown in Figure 2, each Channel Port on the CWDM/AD module
has a Left and Right port. Each Channel Port supports a different transmit and
receive wavelength based on the CWDM/AD model. Data transmitted and received
by Channel Port Left is aggregated on Common Port Left and data transmitted and
received by Channel Port Right is aggregated on Common Port Right.
When connecting external dual fiber transceivers to the Channel Port, select an
Warranty
WARNING
The operating description in this Instruction Manual is for use by qualified personnel only. To avoid electrical
shock, do not perform any servicing of this unit other than that contained in the operating instructions,
unless you are qualified and certified to do so by Omnitron Systems Technology.
Warranty
This product is warranted to the original purchaser against defects in material and workmanship for a
period of ONE YEAR from the date of shipment. You may register your product on the Internet at http://
www.omnitron-systems.com. During the warranty period, Omnitron will, at its option, repair or replace
a product which is proven to be defective.
For warranty service, the product must be sent to an Omnitron designated facility, at Buyer’s expense.
Omnitron will pay the shipping charge to return the product to Buyer’s designated US address using
Omnitron’s standard shipping method.
Limitation of Warranty
The foregoing warranty shall not apply to defects resulting from improper or inadequate use
and/or maintenance of the equipment by Buyer, Buyer-supplied equipment, Buyer-supplied interfacing,
unauthorized modifications or tampering with equipment (including removal of equipment cover by
personnel not specifically authorized and certified by Omnitron), or misuse, or operating outside the
environmental specification of the product (including but not limited to voltage, ambient temperature,
radiation, unusual dust, etc.), or improper site preparation or maintenance.
No other warranty is expressed or implied. Omnitron specifically disclaims the implied warranties of
merchantability and fitness for any particular purpose.
Exclusive Remedies
The remedies provided herein are the Buyer’s sole and exclusive remedies. Omnitron shall not be liable
for any direct, indirect, special, incidental, or consequential damages, whether based on contract, tort,
or any legal theory.
040-08878-001C 12/10
Page 1
Omnitron Systems Technology * 140 Technology Dr. #500 * Irvine, CA 92618
949.250.6510 tel * 949.250.6514 fax * www.omnitron-systems.com