MTS Multipurpose Simulated - Manual (Page 77)

5.5.2.6.0 Displacement Mode Parameters
Displacement Mode Parameters
Description Parameter
See description in COD mode parameters. JIC Absolute Unload
Specify the displacement increment added
to the current displacement level at the JIC Displacement Increment
beginning of each ramp segment to
determine a maximum displacement for this
step. If the maximum displacement is
reached before the maximum COD or load
level is reached, it triggers the next segment
of the step.
See description in COD mode parameters. JIC Crack Propagation Hold
Time
See description in COD mode parameters. JIC Frame Stiffness
See description in COD mode parameters. JIC Load Ramp Rate
See description in COD mode parameters. JIC Number of Unloads
See description in COD mode parameters. JIC Percent of Final
Precrack Load
See description in COD mode parameters. JIC Percent Unload
Specify a value other than zero to apply a
COD limit during the ramp segment of a JIC JIC Ramp COD Limit
Increment
step. The limit trips if the measured COD
exceeds the specified limit value during the
ramp segment of a step. When the limit trips,
the JIC step immediately switches to the hold
segment of the JIC step.
See description in COD mode parameters. JIC Ramp Load Limit
Increment
See description in COD mode parameters. JIC Ramp Rate
See description in COD mode parameters. JIC Reload Rate
See description in COD mode parameters. JIC Unload Method
See description in COD mode parameters. JIC Unload Rate
MTS TestSuite 77
5.0 Running Simulation Tests