MTS Series 505G2 SilentFlo Hydraulic Power Unit Model 505G2-180 User Manual
MTS Hardware
This manual is related to the following products:
Table of contents
Document Outline
- Technical Support
- Preface
- Introduction
- Safety
- General Safety Practices: Hydraulic Power Units and Hydraulic Service Manifolds
- Read all manuals
- Locate and read hazard placards/labels
- Specimen temperature changes
- Know facility safe procedures
- Know controls
- Have first aid available
- Know potential crush and pinch points
- Be aware of component movement with hydraulics off
- Know electrical hazards
- Keep bystanders safely away
- Wear proper clothing
- Remove flammable fluids
- Check bolt ratings and torques
- Practice good housekeeping
- Protect hoses and cables
- Provide proper hydraulic fluid filtration
- Protect accumulators from moving objects
- Do not exceed the Maximum Supply Pressure
- Do not disable safety devices
- Use appropriately sized fuses
- Provide adequate lighting
- Provide means to access out-of-reach components
- Wear appropriate personal protection
- Handle chemicals safely
- Know system interlocks
- Know system limits
- Do not disturb sensors
- Ensure secure cables
- Stay alert
- Contain small leaks
- Stay clear of moving equipment/avoid crush points
- Know the causes of unexpected actuator motions
- Do not use RF transmitters
- Know compressed gas hazards
- Labels
- General Safety Practices: Hydraulic Power Units and Hydraulic Service Manifolds
- Installation
- Operation
- Maintenance
- Routine Maintenance Overview Checklist
- Models 505.60/.90/.120/.150/.180 HPU Maintenance Schedule
- Spare parts
- Lockout/tagout
- Operating the HPU
- About Checking the Hydraulic Fluid
- About Checking the Low Level/Temperature Detector
- Replacing the Return-line Filter
- About Clamp-Style Housing Filter Replacement
- About Capscrew-Style Housing Filter Replacement
- Replacing the Optional High-Pressure Filter
- Sampling the Hydraulic Fluid
- About Replacing the Hydraulic Fluid
- Inspect the Heat Exchanger
- Hydraulic Power Unit Maintenance and Service Logs