MTS Series 505G2 SilentFlo Hydraulic Power Unit Model 505G2-180 User Manual
Page 41
5. The following table describes the pushbuttons and indicators on the Setup screen.
Description
Name and Location
Pushbutton/Indicator. The pushbutton is used to select the
availability of pump modules. Pressing the button alternates
between the states.
Module #N Not Present/Module #N
Present
Module #N Not Present- yellow: Indicates the module is not
installed in the HPU.
Module #N Present- green: Indicates the module is installed
in the HPU.
Indicator - blue-green: Provides instruction for the setup screen.
Use Buttons Below To Change
Parameters
Pushbutton/Indicator: Used to select temperature display in
either Celsius or Fahrenheit. Push to alternate between the
two temperature scales.
Temp Display In (deg)
Temp Display in °F - gray.
Temp Display in °C - black.
Series 505G2 SilentFlo™ Hydraulic Power Unit Product Information 41
Installation