Unpacking, transport, universal stand and assembly – MK Diamond MK-101 JCS Rental User Manual
Page 11

MK-101 Home Depot Rental Revision 04/05, Effective Date April 21, 2005
Page 11
UNPACKING, TRANSPORT, UNIVERSAL STAND and ASSEMBLY
UNPACKING:
Your MK-101 has been shipped from the factory thoroughly inspected. Only minimal assembly is required.
Use proper lifting techniques when lifting the MK-101.
CONTENTS:
In your container, you will find one (1) MK-101 frame and water basin, one (1) MK-101 Cutting, one (1) 10-
inch wet cutting continuous rim diamond blade, one (1) adjustable cutting guide, one (1) bull nose cutting
guide, one (1) electric water pump, one (1) pump discharge fitting, one (1) cooling transfer tube, one (1) flow
adjusting clamp, one (1) drain plug, one (1) blade wrench, one (1) Table Clip, one (1) splash guard, one (1)
owners manual, one (1) pump manual and one (1) warranty card.
MK-101 w JCS Stand
& Water Basin
MK-101
Cutting Head
Diamond Blade
Adjustable
Cutting Guide
Water Pump Clamp
and Wing Screws
Electric
Water Pump
Pump
Discharge Fitting
Cooling
Transfer Tube
Flow
Adjusting Clamp
Drain Plug
Blade Wrench and
Table Clip
Splash
Guard
Owners
Manual
Pump
Manual
Warranty
Card
TRANSPORT:
1. The MK-101 weighs approximately one hundred and twenty eight (128) pounds.
2. Never transport the MK-101 with water in the Water Basin.
Cutting Head
Handle
Wheels
Lift the saw using the handle.
Follow instructions on page 12.
Casters