MK Diamond MK-370 EXP - Manual (Page 30)

30
(B)
Remove the Inner Flange
(A)
Remove the Diamond
Blade, Outer Flange and
Retaining Nut
(C)
Clean and Lubricate the
Inner and Outer Flanges
and the Retaining Nut
MONTHLY MAINTENANCE
The following maintenance should be performed Monthly.
MK-370EXP SAW MAINTENANCE
(E)
Remove the Blade Guard
then clean and lubricate the
Blade Guard Pivot Shaft
(D)
Clean around Motor Shaft
(F)
Lubricate the front Cutting
Head Pivot Point
(H)
Remove the Cutting Head
(G)
Lubricate the rear Cutting
Head Pivot Point
(I)
Clean the Cutting Head
Pivot Holes