MK Diamond MK-370 EXP - Manual (Page 28)

(I)
Clean the Adjustable Cutting
Guide and Guide Bar
(H)
Clean the Water Pan
28
CLEANUP
Dispose of wastewater in accordance with applicable Federal, State and Local laws.
(B)
Fill the Water Pan with
clean water
(A)
Remove the pump Suction
Screen and clean the Water
Pump of all debris.
(See pump manual for more
detail)
(C)
Run the MK-370EXP Saw
until clear water is seen at
the blade Cooling Flow Points
(Approx. 1 minute)
(D)
Ensure the ON/OFF Switch
is in the OFF position.
Unplug the saw from the
Power source
Ensure the saw is disconnected before completing the remainder of the cleanup
process.
(F)
Dispose the contents of the
Water Pan
(E)
Remove the Cutting
Assembly from the Water
Pan
(G)
Clean the MK-370EXP with
soap and clean water
CAUTION
MK-370EXP SAW CLEANUP
NOTE: