Lenze Card File Handler - Manual (Page 21)

L
1.1 EN 21
Card File Handler
Operation
Organising cards
3.2.4 Exporting data to a SmartMedia card
This function is used to export the drive sets of an archive card to a SmartMedia card for
subsequent use with the card module.
C All drive sets of the card selected from the archive tree will be exported to the
SmartMedia card.
S
How to export data to a SmartMedia card:
1. Insert the SmartMedia card to be written into the card reader connected to your PC.
2. Select the card the drive sets of which you want to export to the SmartMedia card
from the archive tree.
3. Go to the toolbar and click the icon or select the command FileCardExport
to SmartMedia card.
4. Go to the Archive card X --> SmartMedia card dialog box and select the letter for the
drive to which the card reader has been assigned.
5. If required, change the name of the SmartMedia card by clicking the Change
button.
• Enter the new name into the Rename SmartMedia card dialog box and confirm
your entry with OK.
6. Click Save.
Note!
• All drive sets available on the SmartMedia card will be deleted!
• This function requires a Card reader for SmartMedia memory cards to be
connected to the USB interface of your PC!
Supported SmartMedia card readers
(E 33)
• Ensure that the SmartMedia to be written is not provided with a write-
protect sticker!
• Never remove the SmartMedia card during read/write access from the
card reader. This could result in loss of data or damage the SmartMedia card!
Note!
After the data export, the Card File Handler automatically executes the "eject"
function in the card reader to ensure that the SmartMedia card can be removed
without loss of data from the card reader.
For another read/write access to the SmartMedia card, remove the SmartMedia
card and reinsert it into the card reader. After this, it can be identified by the
Card File Handler.
Show/Hide Bookmarks