Lenze EPM−H410 - Manual (Page 92)

Operation
Calling up alarm messages
6
l
92 EDBPM−H410 DE/EN/FR 4.1
You want to ... Press keys ... Example
A call up an alarm message.
Info Druck im Tank uebersteigt
die max. Grenze
150.0
>13-09-2000 10:45a
HELP PgDn
0001
B select the next alarm message.
shift + PgDN Wasserstand unterhalb der PgUp
Schwelle des Prozesses
10
>13-09-2000 10:45a
<13-09-2000 10:55a
HELP PgDn
0032
C select a further alarm message.
shift +
PgDN
Temperatur uebersteigt PgUp
die Sicherheitsgrenze
1600
>13-09-2000 12:25p
#13-09-2000 12:30p
HELP
0006
D select the alarm register.
1. Call up one alarm message first
(see 6.4)
2. Select the alarm register.
– The alarm register logs all alarms
chronologically, with time and
date stamping.
– If "H" is displayed in the left
column, an alarm register has
been selected.
Enter Druck uebersteigt
die Sicherheitsgrenze
125.5
>13-09-2000 10:45a
<13-09-2000 10:48a
#
PdDn 13-09-2000 10:55a
H
0001
3. Select the next or previous alarm
message in the alarm register. shift + PgDN or PgUp
Wasserstand unterhalb der PgUp
Schwelle des Prozesses
10
>13-09-2000 10:45a
<13-09-2000 10:50a
#
PgDn 13-09-2000 10:53a
H
0032
4. Close the alarm register and go back
to the alarm message.
Clr
Esc
E Close the alarm message.
Clr
Esc
)
Note!
ƒ If the alarm register buffer is full, no more alarms are saved.
ƒ Use the »HMI Designer« to define commands for acknowledging
all alarms or clearing the buffer of the alarm register.