Lenze EPM−H410 - Manual (Page 83)

Commissioning
Date/time and contrast setting
5
l
83 EDBPM−H410 DE/EN/FR 4.1
5.5 Date/time and contrast setting
You want to ... Press keys ... Example
A Set the date/time and contrast on the
display.
Port : MSP
Driver : VTNETBOARD
Ver
: 1.01
Addr VT: NO ADDR
Error
: INIT ERR 9
ENTER : Set Clock / Contrast
1. Call up status messages.
shift
2x
2. Select menu for time/date and
contrast.
Enter
B Set the date/time.
1. Select SET CLOCK" menu. PgUp
or PgDN
SET CONTRAST : 04
SET CLOCK:
Wed,13/09/00
12:50:10
==>
2. Select menu.
Enter
3. Select desired field.
or
12:50:10 13/09/00
4. Change value. PgUp
or PgDN
5. If necessary, repeat steps 3. and 4. to
change further values.
6. Confirm entry.
Enter
C Set the contrast of the display.
1. Select SET CONTRAST" menu. PgUp
or PgDN
==> SET CONTRAST : 04
SET CLOCK:
Wed,13/09/00
12:50:10
CONTRAST : 04
2. Select menu.
Enter
3. Set contrast.
more contrast
PgUp
less contrast
PgDN
4. Confirm entry.
Enter
D Close the status display.
Clr
Esc