Lenze EPM−H410 - Manual (Page 75)

Electrical installation
Mounting and removing the memory card
4 MB memory card
4
l
75 EDBPM−H410 DE/EN/FR 4.1
4.3 Mounting and removing the memory card
(
Stop!
ƒ Disconnect the operating unit from its voltage supply before you
start working on it to avoid damage of electrical equipment.
ƒ Operating unit and memory cards include electrostatically
sensitive devices which can easily be damaged if not handled
properly.
4.3.1 4 MB memory card
ƒ You can save and archive your custom−designed configured project on this
memory chip.
ƒ You can mount the memory chip with the saved project into an operating
unit of the same type, in order to transfer the project to this operating
unit.
ƒ The 4 MB memory card can be ordered from Lenze under order
no. EPZ−H210.
Take off the housing cover
0 0
0 +24
VDC
0
VDC
N.C.
1 2 3 4 1 2 3 4 5
N.C. CAN+ Shield CAN- V-
MSP
fuse 800 mA
back-up card
h410_008
Fig. 4−4 Take off the housing cover
1. Loosen 0 bolts and remove housing cover.