Lenze EPM−H410 - Manual (Page 82)

Commissioning
Status messages of the operating unit
5
l
82 EDBPM−H410 DE/EN/FR 4.1
5.3 Status messages of the operating unit
You can always query the status of the keypad and get information about:
ƒ The serial interface
ƒ The name of the loaded driver
ƒ The version of the loaded driver
ƒ The network address of the keypad
ƒ The last error
You want to ... Press keys ... Example
A query the status of the operating unit.
shift 2x Port : MSP
Driver : CAN Lenze M
Ver
: 1.01
Addr VT: NO ADDR
Error
: NO ERROR
ENTER : Set Clock / Contrast
B close the status display.
Clr
Esc
5.4 Status displays on the operating unit
Display On Off Blinking
LED red Bus error − No communication error Communication error
on the system bus
(CAN)
LED green Power Supply voltage
switched on No supply voltage −
LED
yellow Battery Capacity of the
internal battery
depleted Sufficient capacity of
the internal battery −