Lenze EMF2179IB - Manual (Page 18)

Safety instructions
General safety instructions
2
2.2
2.2-1 EDSDEN EN 06/2004
2.2 General safety instructions
ƒ These safety instructions do not claim to be complete. If you have any
questions or problems please contact your Lenze representative.
ƒ The communication module meets the state of the art at the time of
delivery and generally ensures safe operation.
ƒ The data in this manual refer to the stated hardware and software
versions of the communication modules.
ƒ The communication module may create a hazard for personnel, for the
equipment itself or for other property of the operator, if:
– non-qualified personnel work on and with the communication
module.
– the communication module is used improperly.
ƒ The specifications, processes, and circuitry described in this Manual are
for guidance only and must be adapted to your own specific
application.
ƒ Provide appropriate measures to prevent injury to persons or damage
to material assets.
ƒ The drive system must only be operated when it is in perfect condition.
ƒ Retrofitting or changes of the communication module are generally
prohibited. In any case, Lenze must be contacted.
ƒ The communication module is a device intended for use in industrial
power systems. During operation, the communication module must be
firmly connected to the corresponding controllers. In addition, all
measures described in the Manual of the controller used must be
taken. Example: Mounting of covers to ensure protection against
accidental contact.
Show/Hide Bookmarks