beautypg.com

5 commissioning of field devices, Commissioning of field devices, Commissioning of field devices ( 25) – Lenze PROFIBU PC-based Automation User Manual

Page 25

background image

DMS 2.2 EN 07/2011 TD17

L

25

Control technology | PROFIBUS communication manual

Commissioning of PROFIBUS

Detailed commissioning steps

6.2.5

Commissioning of field devices

Parameterise the Lenze field devices connected to PROFIBUS either with the »Engineer« or

with »GDC«, depending on the device.
PROFIBUS is exclusively configured with the »PLC Designer«.

Tip!
We recommend to commission each field device individually and then integrate

them into the PLC program.

Servo Drives 9400 HighLine
During commissioning of a Servo Drive 9400 HighLine, the module parameter

DeactivateDPV1AutoSet must be set to the value "No":

Observe the information with regard to commissioning in the documentation

for the field devices.

See also other documents in the category Lenze Hardware: