Leica Biosystems RM2235 - Manual (Page 7)

5 Leica RM2235
2. Safety
2.1 Safety notes
These Instructions for Use include important
information related to the operating safety and
maintenance of the instrument.
The Instructions for Use are an important part of
the product, and must be read carefully prior to
startup and use and must always be kept near
the instrument.
This instrument is built and inspected according
to the Safety requirements for laboratory instru-
ments.
The current EC Declarations of Conformity can be
found on the Internet:
www.LeicaBiosystems.com
To maintain this condition and ensure safe
operation, the user must observe all notes and
warnings contained in these Instructions for Use.
2.2 Warnings
The safety devices installed in this instrument by the manufacturer only constitute the basis for
accident prevention. Operating the instrument safely is, above all, the responsibility of the owner,
as well as the designated personnel who operate, service or clean the instrument.
To ensure trouble-free operation of the instrument, make sure to comply with the following
instructions and warnings.
The safety and caution notes in this chapter must be observed at all times.
Be sure to read these notes even if you are already familiar with the operation and use of other
Leica products.
The protective devices located on the instrument and the accessories must not be removed or
modified. Only service personnel qualified by Leica may repair the instrument and access the
instrument's internal components.
These Instructions for Use must be ap-
propriately supplemented as required
by the existing regulations on accident
prevention and environmental safety in
the operator‘s country.