Leica Biosystems RM2235 - Manual (Page 15)

13 Leica RM2235
4. Instrument Setup
4.1 Standard delivery
The Leica RM2235 standard delivery includes:
1 Leica RM2235 basic instrument
1 handwheel, complete ................................................................. 14 0500 38181
1 section waste tray ....................................................................... 14 0502 37931
1 tool set, consisting of: .................................................................. 14 0500 38600
1 Allen key with handle No. 5................................................... 14 0194 04760
1 Allen key with handle No. 4................................................... 14 0194 04782
1 Allen key No. 3 ........................................................................ 14 0222 04138
1 screwdriver 3x50, 186 long .................................................... 14 0170 11568
1 bottle (50 ml) of oil for drives, type 405 ................................ 14 0336 06086
1 brush w/magnet ...................................................................... 14 0183 40426
1 dust protective cover ................................................................... 14 0212 30350
1 Instructions for Use EN ............................................................... 14 0500 80101
1 language CD .................................................................................. 14 0500 80200
4.2 Installation site requirements
• Stable, vibration-free laboratory table with
horizontal, flat table top, as far as possible
vibration-free ground.
• No other instruments nearby which might
cause vibrations.
• Room temperature consistently between
+ 10 °C and + 35 °C.
• Obstruction-free access to the handwheel.
The accessories ordered are included
in a separate box.
Carefully check the delivery against
the packing list and the delivery note.
Should you find any discrepancies,
please contact your Leica sales office
without delay.
Never operate the instrument in rooms
with an explosion hazard.