Leica Biosystems LPC Software installation - Manual (Page 58)

58 Software Installation Manual, Revision 2 - 03/2010
1 - Highlight the new port that you just added.
2 - Scroll the Settings page to reveal the Host and TCP Port settings.
3 - Enter the IP address you have just assigned to the printer. Note that the
IP address shown here only serves as an example. You must enter your
printer’s IP address.
4 - Enter 10001 in the field for the TCP port. This is the TCP port number that
the printer displays for connections to the computer.
5 - Click "Save" on the toolbar. This saves your settings and creates the new
port. Note that when Windows issues a security warning, you can con-
tinue the process by pressing "Continue Anyway".
3. Installation