Leica Biosystems LPC Software installation - Manual (Page 101)

101
LabeLase ® Producer - Installation
Ablative Removal of Background - This checkbox activates a special abla-
tive mode that helps improve the efficiency of the background removal pro-
cess.
Rotate the Printed Image 180 Degrees - New in V2.00 - This checkbox will
cause the image printed on the cassette to be rotated by 180 degrees
(upside-down.)
3. User Interface
Print Zone
Distance Home to Print
Zone - Adjust these settings
so the mark is centered ver-
tically on the cassette.
Use the arrow buttons to
move the printed image in
the direction indicated in the
photo.
Fig. 26