Leica Biosystems LPC Software installation - Manual (Page 22)

22 Software Installation Manual, Revision 2 - 03/2010
6b
After you selected USB as your connection type, you will see a screen that
looks similar to the one shown below.
Fig. 17
Even if you are using a USB port to connect the printer to your PC, the LabeLase® Producer software
still expects to communicate with the printer via a serial port. For this to work, the installed USB driver
creates a "virtual" serial port, which convinces the Producer that it is a serial port, but is actually using
a USB connection. When you are ready to install the "virtual" serial port of the USB connection, click
"Next".
3. Installation