beautypg.com

Landoll ICON 819 User Manual

Page 39

background image

Hydraulic Flow Shut—Off Valve
The shut off valve is located at the rear of the tongue. It is designed to relieve the hydraulic pressure in the system
to aid in hook up of the machine. To shut off the hydraulic flow, turn the lever 90° to the side (see decal).
NOTE: This shut off valve should also be turned to OFF position when the safety stops are in place and any service
is to be performed on the machine, while in the raised position. BE CERTAIN to remove the safety stops before
cycling the machine, or damage to the cylinders and the machine can occur..

4001420