Landoll ICON 819 - Manual (Page 11)

About the ICON 819/821 Limited Warranty……..
The ICON 800 Series scraper is designed with front lowering and a push bumper on the rear.
The responsibility of use of this push bumper is left up to the discretion of the owner and operator.
When push loading a pull type scraper, there are many issues to contend with so as not to
damage the scraper or the pull type tractor. The most important is the operator. The push tractor
can be an issue. Size and power must be kept within reasonable range. Should the pull tractor
operator put the scraper bit too deep into the ground, damage can occur due to undue stress on the
frog of the scraper. A straight push is necessary. Out of line or side stress can damage the rear
frame and possibly the scraper tires. Hard hits on link up with the push bumper can also damage
the machine. Whether loading single or tandem machines, care must be taken not to jackknife the
machines. Trained operators and common sense will create less damage and downtime. When
pushing in a bogged down or stuck condition, extreme care must be taken so as not to side stress
or damage the rear frame.
Due to the many ways in which the scraper can be damaged while pushing.
ICON will not Warranty damage to the scraper occurred while pushing.
When pushing this scraper there are many issues to contend
with so as not to damage this machine. Read the owners
manual in regard. The responsibility for the use of the push
bumper is at the discretion of the owner and operator.
ICON will not Warranty damage occurred while pushing.
When pushing this scraper there are many issues to contend
with so as not to damage this machine. Read the owners
manual in regard. The responsibility for the use of the push
bumper is at the discretion of the owner and operator.
ICON will not Warranty damage occurred while pushing
.