Landoll BPSB6 Till-N Seed - Manual (Page 51)

MAINTENANCE
4-9
Troubleshooting
Problem Solution
Machine is shaking or Tillage Rotor is
bouncing Engage Gage Wheels with ground
Reduce operating depth of Tillage Rotor
Increase air pressure in Air Shock
Machine is shaking and Drive Rotor is
not Turning Check if rotors are plugged
Check rotor drive chain
Drive Rotor is skidding Check for items that maybe plugging rotors
Too much air pressure in Air Shock
Rockshaft Lock Pin was left in
Rockshaft Lock Clamp was not loosened
Check rotor drive chain
Tillage Rotor Teeth plugging up with
soil and vegetation Soil is too wet for seeder operation
Tillage Rotor plugging with long grass Grass is too wet or green for seeder operation
Uneven seed distribution or uneven
stand Check for plugged seed cups
Check to see if agitator is working properly
Check if Drive Rotor is loosing traction
If so, reduce pressure in Air Shock
Seed is not coming out Check if Transmission Klik Pin is in place
Check if seed is in Seedbox
Check if Transmission chains are properly adjusted
Nick marks on rotor assembly from
opposite side Large rotor Castle Nuts are not tight enough
Tighten nuts which clamp the blade stack to 400 ft-lbs