Landoll 1806/1806-1 FS, FSC, FSB Series Flail Shredder - Manual (Page 8)

987rev0713 Page 4B 8J306
5D019 5D020
2J099
9C594
528933
528938
4K309
528933
5D006
8J273
4K031
4K036
8D387
528934
528934
DANGER
ROTATING DRIVE LINE
FAILURE TO HEED THESE WARNING MAY
RESULT IN PERSONAL INJURY OR DEATH.
KEEP CLOTHING, YOURSELF
AND OTHERS WELL CLEAR
DO NOT OPERATE UNLESS PTO GUARDS,
TRACTOR MASTER SHIELD AND IMPLEMENT
GUARDS ARE IN PLACE.
ROTATING SHAFT UNDER THIS COVER.
WATCH FOR MOVEMENT.
DO NOT LIFT COVER UNTIL ALL
MOVEMENT HAS STOPPED.
CAUTION
THIS TRANSMISSION BOX
FOR 540 RPM ONLY!
CAUTION
THIS TRANSMISSION BOX
FOR 1000 RPM ONLY!
IMPORTANT
THIS TRANSMISSION BOX
SHIPPED WITHOUT OIL!
BEFORE STARTING MACHINE
ADD OIL SUMMER
WINTER EP140
EP 90
WARNING
THROWN OBJECT HAZARD
KEEP AWAY
TO PREVENT SERIOUS INJURY OR DEATH
FROM THROWN OBJECTS, KEEP AWAY FROM
DISCHARGE AREA DURING OPERATION.
KEEP OTHERS OUT OF VICINITY WHILE
OPERATING.
LUBRICATION INSTRUCTIONS
GREASE P.T.O. JOINTS AND TELESCOPING SHAFT AND
TUBE ASSEMBLY DAILY. 1.
GREASE UNIVERSAL JOIN ON CROSS SHAFTS DAILY. 2.
GREASE THE SIX FLANGE BEARINGS AND THE THREE
REAR PIVOT TUBE BEARINGS EVER 40-50 HOURS.
(THERE IS ONE FLANGE BEARING ON THE OUTER END
OF EACH CROSS SHAFT AND ONE ON EACH END OF
THE TWO ROTORS. THE BEARING ON THE INNER
END OF EACH ROTOR IS MOUNTED ON THE CENTER
PLATE OF THE MACHINE. 3.
REPACK WHEEL BEARINGS ONCE A YEAR. 4.
CHECK OIL LEVEL IN GEARBOX BEFORE USING .
MAINTAIN LEVEL WITH PROPER GRADE OF LUBRI-
CANT. CHANGE OIL AT THE BEGINNING OF EACH
SEASON. 5.
8J-273
CAUTION
OPERATOR MUST REMAIN NO TRACTOR WHILE POWER TAKE OFF
IS IN MOTION. 1.
NEVER MAKE ADJUSTMENT, LUBRICATE, OR CLEAN MACHINE
WITH ANY PART OF MACHINE IN MOTION. 2.
DO NOT PERMIT TRACTOR RIDERS OTHER THAN OPERATOR. DO
NOT ALLOW ANYONE TO RIDE THE MACHINE. 3.
DO NOT OPERATE SHREDDER IN EXCESS OF STANDARD TRACTOR
PTO SPEED. 4.
BE CAREFUL. OBSERVE ALL STANDARD SAFETY PRECAUTIONS. 5.
BLOCK UP MACHINE BEFORE ATTEMPTING SERVICE UNDER
MACHINE. DO NOT USE HYDRAULIC CYLINDER TO SUPPORT
MACHINE WHEN WORKING UNDER IT. 6.
THIS MACHINE PRODUCED
UNDER ONE OR MORE OF
THE FOLLOWING PATENTS:
US 3,070,084 US 3,390,727
US 3,555,797 US 4,534,416
US 4,871,030
CANADA 1,223,476
8D387