JUMO 902815 Dtrans T100 Screw-In RTD Temperature Probe Without/With Transmitter Operating Manual - Manual (Page 10)

10
4 Setup program
Configuration from a PC
The setup program is available for configuring the programmable 2-
wire transmitter from a PC. The connection is made using a special
configuration cable with a M12 × 1 machine connector and M12 × 1
socket, and a RJ-45 Western plug. In addition, you will also need the
PVC connecting cable, 2 meters long. The PC interface with USB/TTL
converter and USB cable is needed for connecting up to a PC (see
accessories for the programmable 2-wire transmitter).
H
In order to configure the 2-wire transmitter, it must be
connected to the voltage supply.
If no power supply unit or supply isolator is available, the
transmitter can be configured using a 9 V battery as a power
source.