JUMO 707050 dTRANS T05 - Programmable 2-Wire Transmitter Data Sheet - Manual (Page 6)

2012-06-04/00576949
Data Sheet 707050 Page 6/12
JUMO GmbH & Co. KG
Delivery address: Mackenrodtstraße 14
36039 Fulda, Germany
Postal address: 36035 Fulda, Germany
Phone: +49 661 6003-0
Fax: +49 661 6003-607
E-mail: [email protected]
Internet: www.jumo.net
JUMO Instrument Co. Ltd.
JUMO House
Temple Bank, Riverway
Harlow, Essex CM20 2DY, UK
Phone: +44 1279 635533
Fax:
+44 1279 635262
E-mail: [email protected]
Internet: www.jumo.co.uk
JUMO Process Control, Inc.
8 Technology Boulevard
Canastota, NY 13032, USA
Phone: 315-697-5866
1-800-554-JUMO
Fax: 315-697-5867
E-mail: [email protected]
Internet: www.jumo.us
Case
Approval/approval marks
None
IP protection type
In terminal head, form B IP54/IP65 (depending on the version)
Open assembly IP00
On DIN rail IP20
a All specifications refer to the measuring range end value of 20 mA or 10 V
b Under calibration conditions
c % refer to the set measuring span. The greater value of the long-term stability applies.
707050 707051
Material Polycarbonate UL 94 V2 (grouted) Polybutylene terephthalate UL 94 V0
Terminal type Screw terminals: Screw terminals:
Wire type Rigid and flexible wires Rigid and flexible wires
≤ 1.75 mm²; 0.2 mm² to 2.5 mm²
AWG/kcmil min. 26, max 12
Stripping length 12 mm
Max. torque 0.6 Nm Torque 0.5 - 0.6 Nm
Spring-cage terminals
Rigid and flexible wires
0.2 mm² to 2.5 mm²
AWG/kcmil min. 26, max 12
Stripping length 8 mm
Assembly type In terminal head, form B (DIN EN 50446); On DIN rail TH 35-7.5
In the surface-mounted case (see accessories); Or TH 35-15 (DIN EN 60715);
In the control cabinet
(mounting element required)
Installation position Any
Weight ~ 35 g ~ 50 g
707050 707051